F18 error in siemens washing machine

If you see the code F18 on the electronic display of the Siemens washing machine, it means that the machine was unable to drain the dirty water in 90 seconds. An error is displayed on the control unit, and the machine enters the "Important malfunction" mode.

There can be several reasons for this problem:

• The pump is broken,
• Failed to reach the required level of n1 during the drain,
• The pressure switch was blocked,
• The controller is out of order,
• A failure has occurred in the electronic control unit system.

You can repair the mechanism yourself or invite a mechanic from the service center to diagnose and solve the problem.

Self repair washing machine

In order to restore the normal operation of the device with your own hands, you need to do the following:

• Remove the pump and carefully inspect it for damage, rinse it under running water and install it back,
• Diagnose the pressure switch if it is broken, you will need to install a new part,
• Check if the electronic control module is working, it may need to be repaired or a complete replacement of the part.

All work on the restoration of an electronic system requires certain knowledge and skills in working with electronics. It is better to entrust the replacement of this part to professionals. They will do the job quickly and with a guarantee.

If you have any questions or want to call the mechanic, call us (order a call back).